Transfer roller unit, 1 removal procedure, 2 reinstallation procedure – Konica Minolta bizhub C650 User Manual
Page 34
Transfer belt unit, Transfer roller unit replacement instructions
10
2.
Transfer roller unit
2.1
Removal procedure
1.
Raise the lock levers [1] (at two
places) of the transfer roller unit in
the direction shown by the arrows to
unlock the transfer roller unit.
2.
Holding onto the lock levers [1] (at
two places), remove the transfer
roller unit [2].
2.2
Reinstallation procedure
1.
Holding onto the lock levers [1] (at
two places), mount the new transfer
roller unit [2].
2.
Lower the lock levers [1] (at two
places) toward the direction shown
by the arrows to lock the transfer
roller unit.
NOTE
• Make sure that the levers are locked
in position both at front and rear.
3.
Close the upper right door [1].
[1]
[2]
A00JF2C055DA
[2]
[1]
A00JF2C056DA
A00JF2C544DA
[1]