Konica Minolta pagepro 5650 - Manual (Page 268)

Configuring the Printer 250
The System - Device Information - Interface Information window provides
the following information.
Item Description
Protocol
Information TCP/IP If Enable is displayed, TCP/IP is enabled.
If Disable is selected, TCP/IP is disabled.
IPv6 If Enable is selected, IPv6 is enabled.
If Disable is selected, IPv6 is disabled.
Bonjour If Enable is selected, Bonjour is enabled.
If Disable is selected, Bonjour is disabled.
FTP If Enable is selected, FTP is enabled.
If Disable is selected, FTP is disabled.
Dynamic DNS If Enable is selected, Dynamic DNS is
enabled.
If Disable is selected, Dynamic DNS is dis-
abled.
IPP If Enable is displayed, IPP is enabled.
If Disable is selected, IPP is disabled.
LPD If Enable is selected, LPD is enabled.
If Disable is selected, LPD is disabled.
RAW Port If Enable is selected, RAW Port is enabled.
If Disable is selected, RAW Port is disabled.
SLP If Enable is selected, SLP is enabled.
If Disable is selected, SLP is disabled.
SMTP If Enable is selected, SMTP is enabled.
If Disable is selected, SMTP is disabled.
SNMP If Enable is selected, SNMP is enabled.
If Disable is selected, SNMP is disabled.
WSD Print If Enable is selected, WSD Print is enabled.
If Disable is selected, WSD Print is dis-
abled.
AppleTalk If Enable is displayed, AppleTalk is enabled.
If Disable is selected, AppleTalk is disabled.
NetWare If Enable is displayed, NetWare is enabled.
If Disable is selected, NetWare is disabled.
IEEE802.1x If Enable is selected, IEEE802.1x is
enabled.
If Disable is selected, IEEE802.1x is dis-
abled.