Konica Minolta pagepro 5650 - Manual (Page 262)

Configuring the Printer 244
Device Information
Summary (previous page)
The System - Device Information - Summary window provides the follow-
ing information.
Item Description
Printer name/status Shows the name assigned to your printer, and dis-
plays the current status of the printer-just as it's dis-
played on the printer's control panel message
window.
"
The status display allows you to remotely
identify possible printer problems, such as out
of paper and out of toner.
Device Status
(Product image) Identifies the type of printer that you are browsing.
The printer is pictured in the illustration with its cur-
rent configuration.
Memory Displays the amount of memory installed in the
printer.
HDD If an optional hard disk kit is installed in the printer,
displays the size of the hard disk kit.
If no optional hard disk kit is installed in the printer,
displays “Not Installed”.
Memory Card If an optional CompactFlash card is installed in the
printer, displays the size of the CompactFlash card.
If no optional CompactFlash card is installed in the
printer, displays “Not Installed”.
Duplex Identifies whether the duplex is “Installed” or “Not
Installed”.
Paper Source Identifies the paper feed units installed on the
printer.
Output Tray Identifies the output trays installed on the printer.
Finisher Identifies whether the offset tray is “Installed” or “Not
Installed”.
Network Lists the installed printer interface (Ethernet
10Base-T/100Base-TX/1000Base-T).