Konica Minolta bizhub 420 - Manual

RESET the settings
Adjust contrast
of the touch
screen
Save copy
settings
Open Utility/Counter screen
Input a value or
a number
CLEAR a
value
Check the
settings
Proof a copy set
Energy saving ON/OFF
Confirm your
access data
TOUCH SCREEN
BOX
Change to the mode
FAX SCAN COPY
Open
Accessibility
settings
Switch to
Enlarge display
mode
Interrupt a copy job
START a process
POWER ON/OFF
STOP a process
Displays ac-
tions to perform
and results
Change to the
functions of the
tab
Open Job list screen Message display
Indication of free
memory Number of copies
Start Separate scan
function
Open Save in User
Box screen
Open FOLDING screen Open FINISHING screen
Icons
indicating
Machine/Job
status
Choose function of the
BASIC tab
Image of the specified
settings
Open
HELP screen
1. Position the original(s).
2. Type in the number of copies.
3. Press the START key.
STOP A COPY PROCESS
1. Press the STOP key.
1. Press the CLEAR key.
HOW TO USE THE MACHINE
PANEL
TOUCH SCREEN (Basic screen)
Short Guide 1/3
1. Pull out tray 1.
NOTE:
Do not touch the film located
at the right-hand end of the
tray.
CHANGE THE PAPER SELECTION (only for the bypass tray)
2. Load the paper into tray 1
(not higher than ,).
3. Align the trailing-edge guide
with the paper.
1. Touch PAPER in the basic screen.
2. Touch for the bypass tray.
3. Touch CHANGE TRAY SETTINGS.
4. Touch the desired paper selection.
5. Touch OK.
BASIC FUNCTIONS
MAKE A COPY
CLEAR A VALUE
LOAD PAPER IN TRAY 1
REFILL
Manages Black and White