Konica Minolta bizhub PRESS C1100 - Manual (Page 30)

2-20 bizhub PRESS C1100/C1085
Administrator Security Functions 2 2.3
7
Select whether or not to overwrite the temporary data.
% To overwrite the temporary data, press [ON]. Otherwise, press [OFF].
8
If you choose to overwrite the data, select the desired erase mode.
% Press [Mode 1] or [Mode 2]. For detailed information about how to set up and use the erase modes,
refer to the HTML User's Guide.
% If you choose not to overwrite the data, the mode selection does not make any difference.
9
Press [OK] on the Delete Temporary Data Setting Screen.
10
Turn OFF the sub power switch, and turn OFF the main power switch.
% Do not turn off the main power while the message [Cooling in progress / After cooling, power off
automatically] is displayed.
11
Wait for more than 10 seconds.
12
Turn ON the main power switch, and turn ON the sub power switch.