Asus Motherboard NCL-DS - Manual (Page 89)

A S U S N C L - D S S e r i e s A S U S N C L - D S S e r i e s A S U S N C L - D S S e r i e s A S U S N C L - D S S e r i e s A S U S N C L - D S S e r i e s 4 - 2 7 4 - 2 7 4 - 2 7 4 - 2 7 4 - 2 7
4.5 Power menu
The Power menu items allow you to change the settings for the ACPI and
Advanced Power Management (APM) features. Select an item then press
to display the configuration options.
4.5.1 4.5.1 4.5.1 4.5.1 4.5.1 ACPI APIC Support [Enabled] ACPI APIC Support [Enabled] ACPI APIC Support [Enabled] ACPI APIC Support [Enabled] ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power
Interface (ACPI) support in the Application-Specific Integrated Circuit
(ASIC). When set to Enabled, the ACPI APIC table pointer is included in the
RSDT pointer list. Configuration options: [Disabled] [Enabled]
4.5.2 4.5.2 4.5.2 4.5.2 4.5.2 APM Configuration APM Configuration APM Configuration APM Configuration APM Configuration
ACPI APIC Support [Enabled]
APM Configuration
Hardware Monitor
Include ACPI APIC
table pointer to RSDT
pointer list.
IMPORTANT!
Do not change the APIC
support settings after
OS installation;
otherwise, a system
boot failure may
occur.
APM Configuration
Power Management/APM [Enabled]
Video Power Down Mode [Disabled]
Hard Disk Power Down Mode [Disabled]
Suspend Time Out [Disabled]
Throttle Slow Clock Ratio [50%]
System Thermal [Disabled]
Power Button Mode [On/Off]
Restore on AC Power Loss [Last State]
Enable or disable
APM.