Konica Minolta bizhub 4050 - Manual (Page 28)

[Maintenance/Troubleshooting] 3-11
3.2 When a paper jam has occurred 3
3.2.9 Clearing a paper jam in the rear of the Finisher
1
Open the rear cover of the Finisher.
2
Securely hold both sides of the jammed paper, then carefully pull it out.
% Completely remove the jammed paper so that no slip of paper is left inside.
3
Open the trap cover, then remove slips of paper from the inside.
% When you remove the jammed paper from the rear cover of the Finisher, open the trap cover, then
pull out slips of paper.