Konica Minolta KIP 7100 - Manual (Page 14)

KIP Cost Review Application
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP.  2012 KIP. vii_iv
- 13 -
Appendix:
When using the Browse for Printer Log Files functionality of the Cost Review Application there are specific files
needed for this to work correctly.
For Color, the following files will be necessary:
ColorLog-MMMYY.Log
IPSUnattend.Dat
MeterMMMYY.Log
Months.Dat
For Mono the following files will be necessary::
MonoLog-MMMYY.Log
IpsUnattend.Dat
MeterMMMYY.Log
Months.dat
There are a multiple ways to get these files:
1. CRA - If you are able to connect to a printer using the CRA Program this will have pulled these files over
and put them on your system. These can be easily found by going to Start\Run and typing %TMP%. This
will open the Temp folder where these files will be located.
2. KIP PrintNet – PrintNet has the ability to send out the Meter reports via e-mail. These files will be sent in
the e-mail to the desired recipient.
3. Manually – Technician can browse to the D:\Monpath1\LOGDIR folder on the KIP Printer and copy
these files to a connected network location or even to a USB driver inserted into the KIP.