Konica Minolta bizhub C754 - Manual (Page 27)

Selecting the Device to Load From 6
HDD TWAIN driver 6-1
6 Selecting the Device to Load From
Select a device on the network that you can load from. Select the device in
the [Select Devices] dialog box that appears when you first open the HDD
TWAIN driver and when you click [Select] in the main window.
6.1 Selecting a Network Device
Select one of the devices that have been automatically detected on the
network.
Procedure
1
Open the HDD TWAIN driver, or in the main window, click [Select].
– The Select Device window opens.
– A list appears that shows the devices that have been automatically
detected on the network.
– If you want to search for devices again, click [from Search Result].
2
Select the device you want to connect to, and then click [Connect].
– To add a device to the list of registered devices when you connect
to it, select the [Add this to the registered device list] check box. For
more information about the list of registered devices, see "Editing
the List of Registered Devices" on page 6-5.
– If you're loading from a device whose authentication settings have
been configured, enter the necessary information in the various
windows that appear. For details, see "Loading with a Device
Whose Authentication Settings Have Been Configured" on
page 7-1.