Konica Minolta bizhub C250 - Manual (Page 22)

Importing Images 3
TWAIN driver 3-11
3.6 Settings in the Main Window
The following settings and operations are available from the main window.
No. Item Description
1 Save/Restore Setting Settings can be saved and loaded at a later time.
2 Settings Set basic scan parameters. For details, refer to “Parame-
ters on the Settings tab” on page 3-12.
3 Image Set image-processing parameters. For details, refer to “Pa-
rameters on the Image tab” on page 3-14.
4 Area Specify the area to be scanned. For details, refer to “Pa-
rameters on the Area tab” on page 3-15.
5 PUSH Scan Select this check box to start scanning when the [Start] key
in the control panel is pressed.
6 Scan Begins scanning the selected document.
7 Prescan When the document is placed on the glass, a preview of the
scanned image can be shown at a coarse resolution. Doc-
uments can be scanned efficiently by performing a prescan
and adjusting the image or specifying an area to be
scanned before clicking [Scan].
8 Select Devices Click this button to change the scanning device. For de-
tails, refer to “Selecting the Scanning Device” on page 4-1.
1 2 3 4
5 6 7 8