Konica Minolta KIP 9900 - Manual (Page 9)

Mac/Unix Printing
Version A4
7. On the next screen you will need to set the following:
a. In the first pull down select “IP Printing”
b. In the second “Printer Type” pull down select LPD/LPR
c. In the third area “Printer Address” set this to your printer IP Address
d. In the fourth area “Queue Name” set the queue name to KIP, IPS, IPS1, IPS2, or IPS3
(these are the default Queue names already created on the IPS – configuration of the Print
Parameters for each Queue name is detailed below)
e. In the fifth area “Printer Model” select “Other”
8. Locate the desired .PPD file (ex. KIP600.PPD) select “choose”