Konica Minolta KIP 9900 - Manual (Page 6)

Mac/Unix Printing
Version A4
Method #2 – Macintosh Printer Setup
The following steps will walk you through the procedure for setting up a Macintosh system for TCP/IP
printing. These steps apply to Macintosh OS X:
Adding the KIP PPD to the Macintosh system
1. Locate the KIP PPD (Page Definitions) stored with the Windows Driver in the directory
MSC_OSX_PPD either on the KIP Software Operation Guide Disk or contained in the Windows
Driver installer when downloaded from the IPS via PrintNET (IPS address of the printer). Place this
on a flashdrive or copy it to the desktop of the Mac system.
2. On the desktop open the Mac hard drive