Kip restore/ghosting procedure, Prior to the restore – Konica Minolta KIP 7700 User Manual
Page 3
KIP Restore/Ghosting Procedure
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP. 2012 KIP.
- 2 -
Prior to the Restore
Note: Before beginning this process consider backing up the existing
settings. On the desktop of the IPS in the Diaganostics folder there is a
Backup tool, run this to back up the IPS. This process will back up the
selected items.
Note: Once the IPS has been ghosted consider only restoring the
necessary items. For Example if something in one of the .ini files was
corrupt (causing the need for the ghost) putting this .ini file back in will
also put the corruption back in place.
1. Disconnect all removable media and non-factory USB connections. Please mark where each plug
was located, these cannot be plugged into any USB port. They all have a port they are assigned to.
Connect the keyboard, and USB DVD drive.
2. Insert the Restore DVD into the DVD drive. Turn on the IPS.
Immediately get ready for step 3.
3. As soon as the System starts the boot sequence, press the F11
and F12 keys repeatedly until the Boot Select Menu is displayed
on the screen.
4. Using the arrow keys, select the DVD drive to boot to and
press the Enter key. Immediately get ready for step 5.