Dns configure, Dns configure 22, Network setting menu 22 – Konica Minolta Magicolor 2490MF User Manual
Page 30
NETWORK SETTING Menu
22
DNS Configure
"
When using network scanning and when specifying the SMTP server
as a host name instead of as an IP address, be sure to select
“
ENABLE
”, and then specify the IP address of the DNS server.
Purpose
Sets whether or not the DNS server setting is to be speci-
fied.
If specifying the DNS server setting, the SMTP server can
be specified as a host name when using network scanning.
If “ENABLE” is selected, type in the IP address of the SMTP
server.
If “DISABLE” is selected, the DNS server cannot be refer-
enced.
Options
DISABLE/ENABLE
Default
DISABLE
Range
(If “DNS CONFIG.” is set to “ENABLE”)
0-255 for each xxx triplet
Use the keypad to input each number; use the Left and
Right keys to move between triplets.
Notes
Leading zeros of each triplet are automatically suppressed;
for example, “001” displays as “1”
The Cancel/C key can also be used for deleting. To cancel
DNS Configure menu, hold down the Cancel/C key for
more than one second, and then press the Cancel/C key
again after all settings have been cleared.
After changing the settings, the printer must be turned off,
then on again.