Konica Minolta bizhub 654e - Manual (Page 24)

bizhub 754e/654e 2-11
2.2 Enhancing the Security Function 2
% The following screen appears if the previously required settings are yet to be made by the adminis-
trator of the machine. Make the necessary settings according to the corresponding set procedure.
5
Make sure that a message appears prompting you to turn OFF and then ON the main power switch.
Now, turn OFF and then turn ON the main power switch.
% When the main power switch is turned off, then on again, wait at least 10 seconds to turn it on after
turning it off. if there is no wait period between turning the main power switch off, then on again, the
machine may not function properly.
Here is the sequence, through which the main power switch and sub power key are turned on and
off:
Turn off the sub power key ö Turn off the main power switch ö Turn on the main power switch ö
Turn on the sub power key
% If the Enhanced Security Mode is properly set to [ON], a key icon appears at the portion on the
screen enclosed by a red frame, indicating that the machine is in the Enhanced Security Mode.