Atlantis Land A02-IPCAM5 - Manual (Page 40)

37
4.2.2 Alarm sending
Set to send the mail with connection to the alarm detection by the external sensor input or
by the built-in motion detection function.
Alarm sending：Select On to set to send mail with connection to the alarm detection.
File attachment：Set whether an image file is attached to the mail sent or not. When On is
selected, the image file made by the settings below is attached. When Off is selected, only the
message is sent.
Image file name：Type the file name you want to assign to the image to attach a mail. You
can use up to 10 alphanumeric, - (hyphen) and _ (underscore) for naming.
Suffix：Select a suffix to add to the file name:
None: No suffix is added. The Image file name is assigned to the image to be sent via an
e-Mail.
Date & time: The date & time suffix is added to the Image file name. The date/time suffix
consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits), hour (2
digits), minute (2 digits), second (2 digits), and consecutive number (2 digits), thus
14-digit number is added to the file name.
Sequence number: A consecutive number of 10 digits between 0000000001 and
4294967295 and two fixed digits 00 is added to the Image file name.
Motion Detection：Click it on for using Motion Detection function as a sensor. You can set