Listing files – APPLIED ENGINEERING Vulcan User Manual

Page 46

B — BACKUP FILES

R — RESTORE FILES

Q - QUIT

PLEASE SELECT AN OPTION

Press “M” to select BACKUP MODIFIED FILES.

M — BACKUP MODIFIED FILES

P - BACKUP BY PATHNAME

SELECT AN OPTION OR :

At the BACKUP FROM prompt, type in a slash followed
by the name of your Vulcan partition. Ex:

BACKUP FROM --

(/VULCAN1

Press .

At the TO THE DEVICE

prompt, type in the slot

number of your floppy drive (usually “5” for 3.5” and
“6” for 5.25”).

Now type in the drive number of your floppy drive
(usually 1, if you’re booting from a RamKeeper
however, the 3.5” drive number will be 2).

Press .

10) Select where to output the file list;

Note: We recommend keeping a printed list of the
disks contents if you’re able.

◊

Press to send the list to the screen only

◊

Press P- to send the list to the printer and
screen if you have a printer connected.

Backup II will then begin the backup procedure. The program
will tell you which disk it is currently backing up as well as how
many total disks it needs.

11) While the program is copying one disk, write the label

of the next (/MOD2 (date), /MOD3 (date)).

Listing Files

To get a printout of the backup disk contents at any time, follow
these steps:

Oh. 5 - Backing Up the Vulcan