Ameriphone Q90 User Manual

Page 19

Note:

To use the HCO function you must

have a stereo headset or amplified
speaker plugged into the HCO output
jack.

1. Press Power to

turn on the Q90.

2. Make sure HCO

is on by pressing

F9 once or twice,

as needed.

3. Use the Q90 to dial

your relay service number.

4. The Q90 will automatically

mute the audio while you type
and un-mute the audio when
you stop.

5. When finished, hold down Ctrl

and press Power to turn off
the Q90.

G. HCO (Hearing Carry Over) Calls

CHAPTER 6
(CONTINUED)

4. When the relay

service responds
and sends “GA”,
the green Micro-
phone indicator
will light up.

5. You may now voice your response.
6. When you wish the other party to

respond, say ”go ahead”.

7. The Q90 micro-

phone will turn off
automatically
when the relay
service sends text.

8. When finished,

hold down Ctrl
and press Power
to turn off the Q90.

Note:

If the microphone

does not turn on auto-
matically, hold down

Ctrl and press F5

to turn it on manually.
If the microphone does
not turn off automa-
tically, press Esc
to turn it off manually.

Shif

Shift

Ctrl

VCO

REQUEST

MSG 2

Hi-SP

MSG 1

Shift

Power

Shif

Shift

Ctrl

F10

(

TRANS

G 2

Hi-SPEED

SAVE

HCO