Alpine IDA-X100 - Manual (Page 29)

27
-EN
Search Function
You can search for programs by Category, Channel, Artist or Song.
1
Press /ENTER in the XM or SIRIUS mode.
2
Rotate the Double Action encoder to select
Search mode, and then press
/ENTER.
Artist
*
Song
*
Category Channel
* SIRIUS Only
3
Rotate the Double Action encoder to select the
desired Category, and then press
/ENTER.
4
Rotate the Double Action encoder to select the
desired Channel Name, and then press
/ENTER.
• While in Category Search mode, press to return to the selecting
search mode.
• The Search mode is canceled if you press and hold for at least
2 seconds in Category Search mode.
• During list selection, if you press in the outer ring and rotate the
Double Action encoder to the left or right, the list screen changes
screen by screen. If you press then rotate and hold the Double Action
encoder to the left or right, the list screen continuously changes.
• If Alert interruption occurs in the search mode, the search mode is
canceled.
3
Rotate the Double Action encoder to select the
desired Channel/Artist/Song Name, and then press
/ENTER.
• While in Channel/Artist/Song Search mode, press to return to
the selecting search mode.
• The Search mode is canceled if you press and hold for at least 2
seconds in Channel/Artist/Song Search mode.
• Channel search is possible only in the category (last mode).
• During list selection, if you press in the outer ring and rotate the
Double Action encoder to the left or right, the list screen changes
screen by screen. If you press then rotate and hold the Double Action
encoder to the left or right, the list screen continuously changes.
• If Alert interruption occurs in the search mode, the search mode is
canceled.
Select the desired Category (Category
up/down)
1
Press in the outer ring and rotate the Double
Action encoder to the left or right.
Turning to the right will advance to the next Category.
Turning to the left will return to the previous Category.
The first channel in the selected Category is played back.
Receiving Weather or Traffic Information
from SAT Radio
1
Select the SAT Radio Channel for your local traffic/
weather information.
2
Press and hold / for at least 2 seconds in the
SAT mode.
The received weather or traffic channel is stored.
3
Press and hold BAND for at least 2 seconds.
The stored Weather or Traffic channel will be recalled.
4
Press and hold BAND for at least 2 seconds.
Returns to normal mode.
• Channel other than Weather or Traffic can also be stored and
recalled.
Instant Replay Function (SIRIUS only)
In SIRIUS mode, the current channel is saved using the Instant Replay
memory function. Use this function to pause the channel content at any
time. When playback is continued, it will begin at the position it was
paused. This function can be used to store up to 44 minutes of audio.
1
During SIRIUS reception, press / to select the
Instant Replay mode.
“Pause” is displayed, and the received station is stored.
2
Press / again to select the play mode.
The stored contents are played back.
• If you continue to press Fast forward until the end, the Instant Replay
mode is canceled, and the unit will change to usual reception.
3
Press for at least 2 seconds to cancel the Instant
Replay mode.
The unit returns to usual SIRIUS broadcasting mode.
Category Search mode:
Channel/Artist/Song Search mode:
During Instant Replay playback:
Fast reverse: Press and hold .
Fast forward: Press and hold .
Play Time
(Remaining time for
Instant Replay.)