beautypg.com

Wiring diagram hook up procedure – Audiovox LCM1331FDW User Manual

Page 7

background image

Wiring Diagram Hook Up Procedure

Stereo Headphone
Jack

Spade
Terminals

Gray
(Left+)

Stereo Headphone
Jack

Optional Remote
Headphone
Stations

Spade
Terminals

Spade
Terminals

Black
(Ground)

Green
(Right+)

Red: +12 VDC
(Accessory Cir.)

Black: Ground

Power Harness
Item 1

Power
Connector
(2-pin)

Antenna

TV antenna
(If applicable)

Antenna

Connector

Right Out
(Red)

Left Out
(White)

1) Connect the power harness to the

mating connector on the video pod.

2) Connect the power harness to the

vehicle’s electrical system by tapping
into an accessory hot line.

3) Verify all functions of the system before

mounting of the finished assembly.

FM Modulator (p/n 0190730) and RF
Wireless Headphones (p/n WHPRF01)
could be connected with two dual patch
cords (available in two lengths: 3ft. RCA
patch cord p/n 0892351, and 12ft. RCA
patch cord p.n 0892353) connected to left
and right RCA output jacks shown at right.
Two RCA “Y” adapters are required for
this application (p/n 0892165).

7

This manual is related to the following products: