3 installing a dimm, 4 removing a dimm – Asus M2N32-SLI User Manual

Page 40

Chapter 2: Hardware information

2.4.3

Installing a DIMM

Unplug the power supply before adding or removing DIMMs or other

system components. Failure to do so can cause severe damage to both the

motherboard and the components.

To install a DIMM:

1. Unlock a DIMM socket by

pressing the retaining clips

outward.

2. Align a DIMM on the socket

such that the notch on the DIMM

matches the break on the socket.

3. Firmly insert the DIMM into the

socket until the retaining clips

snap back in place and the

DIMM is properly seated.

2.4.4

Removing a DIMM

To remove a DIMM:

1. Simultaneously press the retaining

clips outward to unlock the DIMM.

2. Remove the DIMM from the socket.

• A DDR2 DIMM is keyed with a notch so that it fits in only one direction. Do

not force a DIMM into a socket to avoid damaging the DIMM.

• The DDR2 DIMM sockets do not support DDR DIMMs. DO not install DDR

DIMMs to the DDR2 DIMM sockets.

Support the DIMM lightly with

your fingers when pressing the

retaining clips. The DIMM might

get damaged when it flips out

with extra force.

DDR2 DIMM notch

Unlocked retaining clip

DDR2 DIMM notch