Asus M2N32-SLI - Manual (Page 150)

- Chapter : Software support
TIP: For server systems, we recommend using a lower array block
size. For multimedia computer systems used mainly for audio and
video editing, we recommend a higher array block size for optimum
performance.
Take caution in using this option. All data on the RAID drives will be lost!
2. Press select the Striping
Block then press . The
following submenu appears:
If you selected Striping or Stripe Mirroring, use the up or down
arrow keys to select the stripe size for your RAID 0 array then press
.The available values range from KB to 2 KB. The default
selection is 2 KB. The strip value should be chosen based on the
planned drive usage.
• / KB - low disk usage
• KB - typical disk usage
• 2 KB - performance disk usage
.` Press to select the Free Disks area. Use the left or right arrow
keys to assign the array disks.
. Press to create RAID set. The following message box appears.
Clear disk data?
[Y] YES [N]
. Press to clear the selected disks or to proceed without
clearing the disks. The following screen appears.
8K ↑
16K
32K
64K
128K
Optim↓