Lenovo C315 All-In-One - Manual (Page 61)

Hardware Maintenance Manual
58
6. Align then insert the new inverter board to the chassis.
7. Screw back the two screws on the inverter board.
8. Connect the inverter board cable to the inverter board.
9. Install the optical drive. Refer to the steps 8 to 9 of the ”Replacing the
optical drive“ section.
10. Install the LCD panel. Refer to steps 5 to 6 of the ”Replacing the LCD
panel“ section.
11. Install the computer cover. Refer to “Completing the installation” .
Replacing the system fan
To replace the system fan
1. Remove the computer cover. Refer to “Removing the computer cover” .
2. Remove the LCD panel. Refer to steps 2 to 4 of the “Replacing the LCD
panel section” .
3. Remove the four screws that secure the system fan to the chassis 1
and disconnect the system fan cable from the system board 2 .