Lenovo C315 All-In-One - Manual (Page 42)

Chapter 7. Replacing hardware
39
Replacing a memory module
Attention
Turn off the computer and wait 3 to 5 minutes to let the computer
cool before removing the computer cover.
To remove the computer cover:
Note
For this procedure, it helps to place the computer face-down on a
soft flat surface. Lenovo recommends that you use a blanket, towel,
or other soft cloth to protect the touch screen surface from scratches
or other damage.
1. Remove any media (diskettes, CDs, or memory cards) from the drives,
shut down your operating system, turn off all attached devices, and
the computer.
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power
cords, input/output (I/O) cables, and any other cables that are
connected to the computer. Refer to Locating connectors on the rear
of the computer .
4. Remove the screw that secures the memory cover to the back of the
computer.