1130 system board assembly – Lenovo E49 Notebook User Manual
Page 67
Use only the battery specified in the parts list for your computer. Any other battery could ignite
or explode.
Insert a screwdriver into the backup battery hole and push the backup battery until the battery pops up.
1130 System board assembly
Important notices for handling the system board:
When handling the system board, bear the following in mind:
• Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite.
• Avoid rough handling of any kind.
• At every point in the process, be sure not to drop or stack the system board.
• If you put a system board down, be sure to put it only on a padded surface such as an ESD mat or a corrugated
conductive surface.
For access, remove these FRUs in order:
•
“1010 Battery pack” on page 44
•
“1020 Optical drive” on page 44
•
“1030 Bottom slot cover” on page 46
•
“1040 Memory modules” on page 46
•
“1050 Hard disk drive assembly” on page 47
•
“1060 PCI Express Mini Card for wireless LAN” on page 49
•
“1070 Thermal fan assembly” on page 51
•
“1080 Microprocessor” on page 53
•
•
“1100 Keyboard bezel” on page 57
•
“1120 Backup battery” on page 60
Chapter 7
.
Removing and replacing a FRU
61