Lenovo IdeaCentre K230 - Manual (Page 17)

12
User Guide
Note: After this operation, all existing data in the system partition will
be lost, and other partitions on the disk will remain unchanged. In order
to prevent loss of data, be sure to back up important data before this
operation.
Note: Do not change the size of partition drive C after the backup
operation. This will ensure that the required space for every recovery
option is available.
Detailed Operation Procedure (example: Recovering Factory Backup):
1. Power on the computer. When the screen displays the Lenovo picture initially,
press the LVT key on the keyboard to start the Rescue System, where you can
select OneKey Recovery.
2. Select Recover Factory Backup to start the system recovery function.
Note: System Recovery will overwrite all of the data in drive C; In order to
prevent loss of data, be sure to back up relevant data before performing
system recovery.
3. Follow the onscreen instructions, and press E on the keyboard to start recovery
if you are sure you want to recover.
4. Please wait during the process of system recovery. Do not interrupt the
operation during the recovery process.
5. After the system is recovered successfully, the software prompts to restart the
computer. Restart the computer and enter the system.
2.3 File Management
With the File Management module, you may access the critical data in directories
such as Desktop or Document of the system partition (usually drive C) when the
system crashes and is irrecoverable, and backup such data into other partitions or
storage devices.
Launch
Power on the computer. When the “Lenovo” picture appears on the screen initially,
press the “LVT” key to launch Rescue System. Then select File Management.
File Backup
Select the file and folder to be copied in the left dialog box, and select the target
folder and drive letter in the right dialog box. The drive letter of the source file must
be different with the target drive letter. Then click Copy.
31035995_IdeaCentre K UG_EN_V3.0.indd 12 2008.10.20 2:11:29 PM