Lenovo IdeaPad S110 - Manual (Page 46)

Lenovo IdeaPad S110 Hardware Maintenance Manual
42
Thermal module
For access, remove these FRUs in order:
• “Battery pack” on page 31
• “Keyboard” on page 32
• “Base cover” on page 34
Figure 11: Removal steps of thermal module
Remove the four screws . Detach the connector in the direction shown by
arrow . Lift and remove the thermal module in the direction shown by
arrow .
When installing: Make sure that the thermal module connector is attached
firmly to the system board.
Step Screw (quantity) Color Torque
M2.0 × 3.0 mm, flat round-head,
nylon-coated (4) Black 1.35 kgfcm
3
2
1
1
1
1