Lenovo ThinkCentre M71e - Manual (Page 34)

Cisco EnergyWise support for the Windows 7 operating system
The Cisco EnergyWise solution collaborates with Power Manager to measure, report, and reduce the energy
consumption of an entire corporate infrastructure.
To configure Cisco EnergyWise Deployments policies, do the following:
Under Computer Configuration, click Classic Administrative Templates ➙ Administrative Templates
➙ Lenovo ThinkVantage Components ➙ Desktop Power Manager for Vista and Windows 7 ➙
EnergyWise Configuration Deployments.
The following table provides the detailed information about each policy.
Table 6. EnergyWise Configuration Deployments
Policy settings Description
EnergyWise Specifies whether to use the EnergyWise solution.
Configurable options include:
• Not configured
• Enabled
• Disabled
If you enable this policy setting, the EnergyWise solution
is enabled on all client computers.
If you disable this policy setting, the EnergyWise solution
is disabled on all client computers.
This setting is not supported on Windows Vista client
computers.
Port No Specifies the port number used to communicate with the
EnergyWise solution.
Configurable options include:
• Not configured
• Enabled
• Disabled
If you enable this policy setting, you must provide a port
number value.
Note: The default port number value is 43440.
Domain Specifies the domain name of the EnergyWise solution.
Configurable options include:
• Not configured
• Enabled
• Disabled
If you enable this policy setting, you must input the
domain name of the EnergyWise solution.
Note: The default domain name is cisco.
28 Power ManagerDeployment Guide