Lenovo ThinkPad W700ds - Manual (Page 57)

7. Find the notch on the contact edge side of the SO-DIMM you are
installing.
Attention:
To avoid damaging the SO-DIMM, do not touch its contact
edge.
With the notched end of the SO-DIMM toward the contact edge side of
the socket, firmly insert the SO-DIMM into the socket at an angle of
about 20 degrees
1 ; then pivot it downward until it snaps into place
2 . Make sure that the SO-DIMM is firmly fixed in the slot and cannot
be moved easily.
20
1
2
2
1
Note: If you install a memory module in only one of the two memory
slots, install it in the slot indicated as “SLOT-0”.
Chapter 5. Upgrading and replacing devices
49