Lenovo IdeaCentre A700 - Manual (Page 32)

Hardware Maintenance Manual
30
Removing the computer stand
Attention
Turn off the computer and wait 3 to 5 minutes to let the computer
cool before removing the computer stand.
To remove the computer stand:
1. Remove any media (diskettes, CDs, or memory cards) from the drives,
shut down the operating system, turn off all attached devices, and the
computer.
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power
cords, input/output (I/O) cables, and any other cables that are
connected to the computer. Refer to “Locating connectors on the rear
of the computer.”
4. Push the computer stand upright , then slide up the little handle to
lock the computer stand .