Lenovo 3000 H310 Desktop - Manual (Page 19)

16
Hardware Replacement Guide
Replacing an optical drive
Attention:
Do not remove the computer cover or attempt any repair before reading the
“Important safety information” in the Safety and Warranty Guide that was
included with your computer or in the Hardware Maintenance Manual (HMM)
for the computer. To obtain copies of the Safety and Warranty Guide or
HMM, go to the Support Web site at http://consumersupport.lenovo.com.
To replace an optical drive
1. Remove the computer cover. Refer to “Removing the computer cover”.
2. Remove the front bezel. Refer to “Removing the front bezel”.
3. Remove the 2 screws that secure the optical disk bay to the chassis.
4. Slide out then lift up the optical disk drive bay.
2
1
5. Disconnect the data and power cables from the rear of the optical drive.
6. Remove the 4 screws that secure the optical drive to the optical disk bay and
push the optical drive straight out of the front of the disk bay.