Lenovo ThinkServer TD340 - Manual (Page 8)

LPe16000 Series HBA Installation Manual P007648-01A Rev. A
1. Introduction
Overview
7
Compatibility
Prerequisites
Use PCIe Gen 2 compliant systems that are x8 or x16 lane at up to 5 GT/s per lane.
HBA Identification
Each HBA ships with several numbers clearly marked on the board. Emulex
recommends recording these numbers before installation.

Serial number – assigned by Emulex and used when communicating with
Emulex.

IEEE address – a unique 64-bit identifier used for system configuration

World Wide Name (WWN) – derived from the IEEE address, the FC industry
uses the WWN for FC connectivity.
Note: If the adapter has two ports, it has two IEEE addresses and two WWNs; one
for each port with the second IEEE address/WWN being the next successive
number of the first.
Table 1. Software and Hardware Environments
Software Environments See the HBA’s website for compatible operating systems.
Hardware Environments PCIe 2.0 and CEM 2.0 compliant systems and backwards compatible to 1.0a and
1.1 compliant systems.