beautypg.com

Figure 2-1, Figure 2-2 releasing the latch on an – Lenovo ThinkServer TD340 User Manual

Page 10

background image

LPe16000 Series HBA Installation Manual

P007648-01A Rev. A

2. Installation

Preparing the HBA for Installation

9

The HBA uses different types of optical transceivers. Figure 2-1 shows an example

of one type with the bail (handle) extended.

Figure 2-1 Typical Optical Transceiver

4. To remove a transceiver, pull the bail (handle) out and down to release the latch

and gently pull the transceiver out. Do not force it. After the latch is released, the

transceiver slides out easily.
Figure 2-2 shows a transceiver with the latch released (bail extended) and another

transceiver latched in place.

Figure 2-2 Releasing the Latch on an Optical Transceiver

This manual is related to the following products: