Lenovo ThinkServer TD340 - Manual (Page 22)

LPe16000 Series HBA Installation Manual P007648-01A Rev. A
3. References
Laser Safety Notice
21
Certification and Classification
The LPe16000 Series HBA host adapters may contain one or more examples of a laser
product known as a small form factor transceiver. This transceiver provides the
physical connection to the optical cable, and its LC-style connector extends through the
mounting bracket. In turn, the host adapter can be inserted into any host system's
appropriate PCIe expansion slot.
In the United States, all optical small form factor transceivers sold by Emulex are
certified as Class 1 laser products that conform to the requirements contained in the
Department of Health and Human Services (DHHS) regulation 21 CFR subchapter J.
The certification is indicated by a label located on the optical small form factor
transceiver.
In Europe, all optical small form factor transceivers sold by Emulex are certified as
Class 1 laser component assemblies that conform to the requirements contained in the
CENELEC (European Committee for Electrotechnical Standardization) standard
EN60825-1:2007 (including amendment 11) and EN60825-2:2004 (including amendment
1). Small form factor transceivers are certified by a recognized European testing agency
and have appropriate markings on the assembly. The DHHS conformity label and
European conformity mark will not be visible externally once the optical small form
factor transceiver is connected to or inserted in the host adapter and the adapter is
installed into a system.
Labeling Requirements
No caution or danger labels are required for use of the small form factor transceiver
since they are Class 1 laser component assembly. In the U.S., the only laser safety label
required is the DHHS certification label that already appears on the small form factor
transceiver. In Europe, the EN60825-1/EN60825-2 standards require that the
system-level product has a Class 1 information label permanently attached and clearly
visible whenever access to the small form factor transceiver optical port is possible.
Each Class 1 product shall have affixed an explanatory label bearing the words:
Alternatively, at the discretion of the manufacturer, the same statement may be
included in user information. If a label is used, an example of the IEC Class 1
information label that is suitable for most European countries is shown below. The
label consists of black printing on a white background. Languages represented on this