Lenovo E40-70 Notebook - Manual (Page 81)

Removal steps of the LCD panel and hinges
Disconnect the EDP cable connector 1 .
a
When installing: Ensure that the connector is attached firmly.
Remove four screws 2 and then remove the LCD panel 3 .
b
b
b
b
c
c
c
Step Screw (quantity) Color Torque
2 M2.5 × 4mm, flat-headed, nylon-coated (4) Black 2.0– 2.5 kgfcm
Remove two screws 4 and the remove the hinges in the direction shown by arrow 5 .
d
d
e
e
Step Screw (quantity) Color Torque
4 M2.5 × 4mm, flat-headed, nylon-coated (2) Black 2.0– 2.5 kgfcm
1160 Integrated camera and LCD cable
For access, remove these FRUs in order:
•
“1010 External battery pack” on page 54
• “1020 Keyboard” on page 54
• “1030 Optical disk drive” on page 56
• “1040 Base cover assembly” on page 57
• “1050 Hard disk drive or solid-state hybrid drive” on page 58
• “1060 Wireless-LAN /Bluetooth card” on page 60
• “1080 Upper case” on page 62
Chapter 10 . Removing or replacing a FRU 75