Lenovo ThinkVision LT1423p 13.3-inch IPS WLED Backlit LCD Mobile Touch Monitor With Pen - Manual (Page 9)

a) Hold the power button for 3 seconds to power on the monitor. After the completion
of the progress bar, the home page will display on screen. Then the monitor is ready
to be connected by WiFi.
b) Hold the power button for 3 seconds to power off the monitor when the monitor is
powered on, but not be connected.
c) Hold the power button for 5 seconds to active LT1423pwCA Control panel Options
page as below page, and the desired action can be selected.
d) If the power button is held for 10 seconds the LT1423pwCA will shut down even
when connected to the host system.
2. Power on/off the LCD panel’s backlight by clicking the power button when the
monitor is connected.
Chapter 1. Getting started 1-3