Getting started, Setting up the stand, Attaching the power cable – Kodak S730 User Manual
Page 5
www.kodak.com/go/digitalframesupport
3
1
Getting started
Setting up the stand
Attaching the power cable
CAUTION:
Do not use this power cable with other devices, including digital
cameras.
Pull to adjust the frame angle for
best viewing.
Your frame displays pictures in landscape
orientation .
To change to portrait orientation , turn the
frame on its side.
Charge the battery (installed at the factory)
by leaving the power connected for at
least 3 hours. The frame does not need to
be turned on.
Your power cable may look different
from the one pictured. Use the plug
that accommodates your type of
power outlet.
See also other documents in the category Kodak Digital Photo Frame:
- P76 (47 pages)
- EasyShare P750 (49 pages)
- EasyShare M1020 (51 pages)
- M1020 (28 pages)
- S830 (61 pages)
- S730 (34 pages)
- S730 (61 pages)
- D725 (36 pages)
- SV710 (53 pages)
- EASYSHARE P85 (11 pages)
- EASYSHARE P736 (52 pages)
- EX811 (60 pages)
- EX811 (22 pages)
- EX811 (26 pages)
- SV710 (19 pages)
- EASYSHARE D1030 (56 pages)
- SV710 (20 pages)
- Smart Frame (35 pages)
- P86 (24 pages)
- D1025 (36 pages)
- Pulse 4H6784 (44 pages)
- EasyShare M820 (28 pages)
- P520 (27 pages)
- P725 (29 pages)
- P520 (45 pages)
- CAT 820 1899 (2 pages)
- W1020 (92 pages)
- W1020 (6 pages)
- W1020 (30 pages)
- EASYSHARE D1025 (36 pages)
- OLED Wireless (89 pages)
- P86 (10 pages)
- P86 (47 pages)
- P87 (7 pages)
- P87 (47 pages)
- P76 (6 pages)
- P76 (13 pages)
- P750 (10 pages)
- P750 (24 pages)
- P85 (10 pages)
- P85 (24 pages)
- P85 (28 pages)
- PULSE - 7 Inch (54 pages)
- OLED Wireless (29 pages)