Inserting the battery, Setting the date and time, Setting the date & time, first time – Kodak Z730 User Manual

Page 9: Inserting the battery setting the date and time

Getting started

www.kodak.com/go/support

Inserting the battery

CAUTION:
Use only a Kodak EasyShare rechargeable Li-Ion battery.

1 Turn the Mode dial to Off.

2 On the bottom of the camera, slide the battery door

and lift to open.

3 Insert the battery as shown. Tilt the battery so the

battery lock is pushed to the side. Push the battery
into the battery compartment.

The battery lock holds the battery in place.

4 Close the battery door.

Setting the date and time

Setting the date & time, first time

The Date and Time have been reset message appears the first time you turn on the
camera or if the battery is removed for an extended time.

1 SET DATE & TIME is highlighted. Press the OK button.

2 Go to step 4 in

Battery
lock