Kodak DC280 - Manual (Page 66)

60
Installing the Software
While the Installer is automatically loading your software, take a few
minutes to fill out and send in the camera product registration card. This
allows you to receive information regarding software updates and
registers some of the products included with the camera.
1 Close all other software programs before starting the Installer.
2 Place the Installer CD into the CD-ROM drive.
3 Load the software.
On a Windows-based computer —if Auto Play is enabled, the first
install window automatically appears. If the first install window does
not automatically appear, choose Run from the Start menu. In the Run
dialog box, type the drive letter that contains the CD and type
\setup.exe. For example: d:\setup.exe
On a Macintosh computer —double-click the Installer icon.
4 Follow the on-screen instructions to install the software.
5 If prompted, restart the computer when the software installation
is complete.
Detailed information on all the Kodak software is included in the online
help for each application.