Kodak DC280 - Manual (Page 33)

27
3
Selecting a White Balance for Indoor Pictures
If you are using your camera indoors where flash is prohibited, your
pictures may take on a green tint if captured under fluorescent tube
lighting, or a reddish-orange tint if captured under tungsten household
lighting. You can correct this problem using the White Balance feature on
the camera. Use the Auto setting for everyday pictures. Use the Daylight,
Fluorescent, or Tungsten setting for taking pictures under these lighting
conditions without flash.
1 Set the Mode dial to Capture.
2 Slide the POWER switch to the right to
turn on the camera.
3 Press the MENU button.
The LCD displays the main Menu screen.
4 Press a button until the icon
is highlighted.
5 Press the DO-IT button.
The LCD displays the White Balance screen.
The current setting is checked (
ä).
6 Press a button until the White
Balance option you want is highlighted.
q Auto (No Icon) —automatically
adjusts the white balance.
q
Daylight —balances for natural
daylight lighting.
q Fluorescent —corrects for the green
cast of fluorescent lighting.
q Tungsten —corrects for the orange
cast of tungsten light bulbs.
7 Press the DO-IT button.
The main Menu screen reappears as the
White Balance icon you selected appears in
the Status Display.
Your camera automatically resets to Auto
when the camera is turned off.
/
/
T W