Using the camera screen as a viewfinder, Using the auto-focus framing marks – Kodak LS743 User Manual
Page 17
Taking pictures and videos
11
Using the camera screen as a viewfinder
IMPORTANT: The camera screen quickly depletes battery power; use it sparingly.
To change the camera screen setting so that it is off when you turn
on the camera, see
.
1 Frame your subject in the camera screen.
For more about auto-focus framing marks, see
2 Press the Shutter button halfway and hold
to set the exposure and focus. When the
framing marks change color, press the Shutter
button completely down to take the
picture.
3 To turn off the camera screen, press the OK
button.
Using the auto-focus framing marks
When using the camera screen as a viewfinder, framing marks indicate the
area that the camera is focusing on. For the best possible pictures, the camera
attempts to focus on foreground subjects, even if the subjects are not centered
in the scene.
NOTE: This procedure does not apply to videos.
1 Press the Shutter button halfway and hold.
When the framing marks turn red, focus is accomplished.
OK
Framing marks