Flash/status screen, Storing pictures and videos on an sd/mmc card – Kodak LS743 User Manual
Page 13
Getting started
7
Flash/Status screen
Press the Flash
button. The current camera status icons are displayed in
the bottom half of the Flash screen.
Storing pictures and videos on an SD/MMC
card
Your camera has 16 MB of internal memory. You can purchase optional
SD/MMC cards for removable, reusable storage for your pictures and videos.
CAUTION:
Insert card as shown. Do not force it; doing so may damage
the camera or card.
Do not insert or remove a card when the green ready light
is blinking; doing so may damage your pictures, card, or
camera.
To insert an SD/MMC card:
1 Turn off the camera and open the card door.
2 Orient the card as shown on the camera body.
3 Push the card into the slot to seat the
connector and close the card door.
4 To remove the card, turn off the camera. Push
the card in, then release it. When the card is
partially ejected, pull it out.
NOTE: When using a card for the first time, we suggest you format it before you take pictures
See
for storage capacities. Purchase SD/MMC cards at a dealer of
Kodak products or
Other settings
Notched
corner