Kodak M590 - Manual (Page 50)

44 www.kodak.com/go/support
Troubleshooting
Computer/connectivity problems
Direct printing (PICTBRIDGE enabled Printer) problems
You cannot take a
picture ■ Turn the camera off, then on again.
■ Depress the Shutter button all the way ( see page 6 ).
■ Insert a new/charged battery ( see page 1 ).
■ Memory is full. Transfer pictures to the computer ( see page 39 ),
delete pictures ( see page 23 ), or insert another card.
Memory card not
recognized or camera
freezes with card ■ Card may be corrupted. Format the card in the camera ( see
page 38 ).
■ Use another memory card. Only MICROSD or MICROSDHC Cards
are supported.
Cannot find the
desired picture/video ■ To view pictures on a card or in internal memory, see page 22 .
Status Solution
Computer does not
communicate with
the camera ■ Turn off the camera, then turn it back on.
■ Make sure the battery is charged and installed correctly ( see
page 1 ).
■ Make sure the KODAK Camera USB Cable, Micro B / 5-Pin is
connected to the camera and the computer (
see page 39 ). Then
turn on the camera.
■ See KODAK Software Downloads at
www.kodak.com/go/camerasw .
Status Solution
Cannot print ■ The camera must be in PTP (not mass storage) mode. Change the
Computer Connection setting (in the Setup menu) to Other
Application (
see page 37 ).
Status Solution