Kodak Z740 User Manual
Page 21
Transferring and printing pictures
www.kodak.com/go/support
15
Connecting the camera to a PictBridge-enabled printer
1 Turn off the camera and printer.
2 Optional: If you have a Kodak 3-volt AC adapter (optional accessory), plug
it into the camera and into an electrical outlet.
IMPORTANT: Do not use the AC adapter included with the Kodak EasyShare
camera dock or printer dock to power your camera.
3 Connect the appropriate USB cable from the camera to the printer. (See
your printer user guide for details. See
order cables.)
Printing from a PictBridge-enabled printer
1 Turn on the printer. Turn on the camera.
The PictBridge logo is displayed, followed by the current picture and menu. (If
no pictures are found, a message is displayed.) If the menu interface turns off,
press any button to redisplay it.
2 Press
to choose a printing option, then press the OK button.
Current Picture—
Press
to choose a picture. Choose the number of copies.
Tagged Pictures—If your printer is capable, print pictures that you tagged for
printing and choose a print size.
Index Print—Print thumbnails of all pictures. This requires one or more sheets of
paper. If the printer is capable, choose a print size.
All Pictures—Print all pictures in internal memory, on a card, or in Favorites.
Choose the number of copies.
Image Storage—Access internal memory, a card, or Favorites.
NOTE: During direct printing, pictures are not permanently transferred or saved to the computer
or printer. To transfer pictures to your computer, see
. In Favorites mode, the
current favorite picture is displayed
Disconnecting the camera from a PictBridge-enabled printer
1 Turn off the camera and printer.
2 Disconnect the USB cable from the camera and the printer.