Kodak Z1275 - Manual (Page 56)

50 www.kodak.com/go/support
Troubleshooting
In Review mode,
you do not see a
picture (or the
expected picture)
on the LCD screen. ■ Check the image storage location setting ( see page 31 ).
In Review mode, a
blue or black
screen is displayed
instead of a
picture. ■ Transfer the picture to the computer ( see page 45 ), then format the
card or internal memory ( see page 32 ).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
Shutter button
does not work. ■ Turn on the camera ( see page 2 ).
■ Wait until the Ready light stops blinking red before attempting to take
another picture.
■ Transfer pictures to the computer ( see page 45 ), delete pictures from
the camera ( page 15 ), switch image storage locations ( see page 31 ),
or insert a card with available memory ( page 3 ).
Slide show does
not run on external
video device. ■ Adjust the camera Video Out setting (NTSC or PAL, see page 32 ).
■ See the external device’s user’s guide.
Picture is too light. ■ Move so there is at least 2 ft (0.6 m) between the camera and the
subject.
■ Decrease Exposure Compensation ( see page 37 ).
Picture is not clear. ■ Clean the lens ( see page 62 ).
■ Make sure your camera is not in Close-up mode.
■ Move so there is at least 2 ft (0.6 m) between the camera and the
subject.
■ Place the camera on a flat, steady surface or use a tripod.
If Try one or more of the following