Kodak Z1275 - Manual (Page 35)

Doing more with your camera
www.kodak.com/go/support 29
Press Menu, ,
, and OK to access
settings
Options
White Balance
Choose your lighting
condition.
Available only in P/M and
Panorama modes. Auto (default)—automatically corrects white balance. Ideal
for general picture taking.
Daylight—for pictures in natural lighting.
Tungsten—corrects the orange cast of household light bulbs.
Ideal for indoor pictures under tungsten or halogen lighting
without flash.
Fluorescent—corrects the green cast of fluorescent lighting.
Ideal for indoor pictures under fluorescent lighting without
flash.
Open Shade—for pictures in shade in natural lighting.
Exposure Metering
Evaluate light levels at specific
areas of a scene.
Available only in P/M and
Panorama modes. Multi-pattern (default)—evaluates lighting conditions
throughout the image to give an optimum picture exposure.
Ideal for general picture taking.
Center-weighted—evaluates the lighting conditions of the
subject centered in the LCD. Ideal for backlit subjects.
Spot—similar to Center-weighted, except the metering is
concentrated on a smaller area of the subject centered in the
LCD.
AF Zone
Select a large or concentrated
area of focus.
Available only in P/M and
Panorama modes. Multi-zone (default)—evaluates 5 zones to give an even
picture focus. Ideal for general picture taking.
Center-zone—evaluates the small area centered in the LCD.
Ideal when precise focus of a specific area in the picture is
needed.
Exposure Bracketing
Interval
Choose the difference in
exposure compensation while
using exposure bracketing.
Available only in P/M mode. Off (default)
+/- 0.3 EV
+/- 0.7 EV
+/- 1.0 EV
See
page 37 .