beautypg.com

Picture quality problems – Kodak Z700 User Manual

Page 56

background image

50

www.kodak.com/go/support

Troubleshooting

Picture quality problems

If...

Try one or more of the following

Picture is too dark
or underexposed

Reposition camera for more available light.

Use Fill flash (

page 26

) or change your position so light is not behind

the subject.

Move so that the distance between you and the subject is within the
effective flash range (

page 9

).

To automatically set exposure and focus, press the Shutter button
halfway. When the Ready light glows green, press the Shutter
button completely down to take the picture.

Adjust the exposure compensation (

page 32

).

Picture is too light

Reposition camera to reduce the amount of available light.

Turn flash off (

page 26

).

Move so that the distance between you and the subject is within the
effective flash range (

page 9

).

To automatically set exposure and focus, press the Shutter button
halfway. When the Ready light glows green, press the Shutter
button completely down to take the picture.

Use P mode to adjust the exposure compensation.

Picture is not clear

To automatically set exposure and focus, press the Shutter button
halfway. When the Ready light glows green, press the Shutter
button completely down to take the picture.

Clean the lens (

page 62

).

Make sure camera is not in Close-up mode if you are more than
27.6 in. (70 cm) from your subject.

Place the camera on a flat, steady surface or use a tripod, especially
in high-zoom settings or in low light.