Kodak ESP 5 - Manual (Page 12)

Printer Overview
6 Kodak ESP 5 AiO Printer User Guide
Printer Power Cord Light
Light Status Cause Action/Solution
Off
The printer power cord is not
properly connected to the printer. Reconnect the printer power cord plug
to the printer.
The electrical power cord is not
properly connected to your electrical
outlet.
Reconnect the cord to the electrical
outlet. Ensure that the electrical
power cord is fully connected to the
alternating current (AC) adapter at
the end of the printer power cord.
Your wall outlet has no power.
Plug a working device into you wall
outlet to test it, or have it checked by
an electrician.
The problem may lie with the power
supply.
Visit Kodak.com for additional
troubleshooting steps, or contact your
local Kodak call center.
On
The power supply is supplying power
to the printer.
None.
Memory Card Slot Slight
Light Status Cause Action/Solution
Off
Either the SD/MMC card is not
inserted or is improperly inserted in
the card slot.
Remove and reinsert the SD/MMC
card.
Blinking
The internal card reader is
initializing or communicating with a
memory card.
None.
On
An SD/MMC card is properly
inserted in the card slot.
None.