Taking panoramic pictures – Kodak TOUCH M577 User Manual
Page 31
Taking pictures/videos
www.kodak.com/go/support
22
Taking panoramic pictures
Use panorama to “stitch” up to 3 pictures into a panoramic scene.
NOTE: Individual pictures are not saved, even if panorama capture is cancelled before stitching occurs.
(Exposure Compensation, White Balance, Focus/Exposure Zone, AF Control, Color Mode, and
Sharpness are set with the first picture. The flash is set to Off.) You can use the self-timer (2- and
10-second delays) while taking panoramic pictures (
). Touch Shutter is not available in
Panorama mode.
1 Tap
, then tap Scene Modes.
2 Tap Panorama, then tap done.
You can take pictures from left to right. To take pictures from right to left, tap
,
then tap
.
3 Take the first picture.
After a quickview, the LCD displays the Liveview and an “overlay” from the first picture.
4 Compose the second picture. Make the overlay from the first picture cover the
same portion in the new picture.
5 If you are taking/stitching only 2 pictures, tap Stitch to stitch them together.
After you take 3 pictures, the pictures are automatically stitched together.
NOTE: To use the self-timer 10-second or 2-second setting, see
.
Take
2 or 3
pictures.
Get 1
panoramic
picture.