Kodak TOUCH M577 - Manual (Page 29)

Taking pictures/videos
www.kodak.com/go/support 20
Using Program mode
The Program Scene mode gives access to the greatest number of settings.
1 Tap , then tap Scene.
2 Tap Program, then tap Apply.
NOTE: Settings that you change in Program mode apply only to pictures taken in Program mode. Use Reset
Camera ( see page 47 ) to reset Program mode to its default settings.
Changing Program mode settings
In Program Scene mode, tap a setting. Then change its value.
Using exposure compensation to adjust brightness
In Program and Panorama modes, you can adjust exposure compensation before you
take a picture to make your pictures darker or lighter. (Only the first picture in
Panorama mode can be adjusted—that adjustment is applied to the remaining
pictures.)
1 Tap Exposure Compensation to access the exposure compensation setting.
2 Drag the slide to increase or decrease exposure compensation.
The scene in the LCD gets lighter or darker.
3 Take the picture when you are satisfied with the exposure compensation level.
Capture
mode
Flash
Self-timer/Burst
Exposure compensation
ISO
Touch Shutter
White balance
Focus/Exposure zone
Color mode
Sharpness
Settings
Swipe
to see
these
tools.